Main Features
1. Simple structure: The design of the single cylinder hydraulic system simplifies the equipment structure and reduces the failure rate.
2. Efficient and energy-saving: Adopting the principle of laminated crushing, the crushing efficiency is high and the energy consumption is low.
3. High degree of automation: equipped with hydraulic system and intelligent control system, easy to operate, can achieve automated operation.
4. Uniform particle size: The crushed material has uniform particle size and high cube content.
5. Strong durability: Key components are made of high-strength wear-resistant materials, with a long service life.
Working Principle
1. Feed: The material enters the crushing chamber from the feed inlet.
2. Laminated crushing: The material is subjected to compression and impact from the moving cone and fixed cone inside the crushing chamber, achieving laminated crushing.
3. Discharge: The crushed material is discharged through the discharge port, and the particle size is controlled by the gap between the discharge ports.
Application Area
1. Mining industry: crushing iron ore, copper ore, gold ore, etc.
2. Building materials industry: crushed limestone, granite, basalt, etc.
3. Metallurgical industry: crushing slag, scrap steel, etc.
4. Chemical industry: crushing chemical raw materials.
5. Other fields: Used for medium and fine crushing operations in sand and gravel production lines.
Technical Parameter
Maintenance
1. Regular lubrication: Regularly lubricate moving parts such as bearings and eccentric shafts to reduce wear.
2. Check the lining plate: Regularly inspect the wear of the dynamic cone and fixed cone lining plates and replace them in a timely manner.
3. Tighten bolts: Regularly check and tighten the bolts of various parts of the equipment to prevent loosening.
4. Cleaning the crushing chamber: Regularly clean the residual materials inside the crushing chamber to prevent blockage.
5. Electrical inspection: Regularly inspect the electrical system to ensure safe operation of the equipment.
Common Faults and solutions
1. Lining wear: Replace with a new lining.
2. Overheating of bearings: Check the lubrication condition and replenish or replace the lubricating oil.
3. Abnormal equipment vibration: Check if the bolts are loose and adjust the equipment balance.
4. Uneven discharge particle size: Adjust the clearance between the discharge ports or check the wear of the lining plate.
